What should be paid attention to when welding PE pipes in summer
1. Check whether the parts of the welding machine are working normally, especially pay attention to whether the temperature of the heating plate of the welding machine is within the standard temperature range (220℃±10℃) before use. 2. The adjustment of the temperature of the heating plate should consider the influence of the surface temperature and the ambient temperature on the actual temperature of the heating plate, to prevent the actual temperature of the heating plate (surface temperature + ambient temperature + heating plate display temperature) > 230 ℃. When the ambient temperature is above 38°C and construction is carried out on the asphalt road, the temperature of the heating plate can be adjusted to between 190°C and 200°C; when the ambient temperature is below 38°C and the construction is carried out in the field, the temperature of the heating plate can be adjusted to 200°C -210℃. 3. Check the misalignment rate before the pipes are connected, and the misalignment rate is not more than 10% of the wall thickness of the pipe. If the misalignment rate exceeds 10% of the wall thickness of the pipe, the contact surface of the weld will be smaller than the wall thickness of the pipe, which will affect the welding effect.
30
2022
/
06
The difference between PE water supply pipe and PE drainage pipe
1. Pressure PE water supply pipes are used to transport tap water, and generally need to pump water from the ground to the ground and residents' homes. Since the PE water supply pipe needs to bear the pumping pressure, the water supply pipe is generally divided into five levels according to the pressure, namely 0.6 MPa, 0.8 MPa, 1.0 MPa, 1.25 MPa, and they bear 6 kg pressure, 8 kg pressure, 10 kg pressure , 12.5kg pressure and 16KG pressure. The higher the pumping pressure, the higher the pressure level requirements for the PE water supply pipe. Polyethylene drainage pipes are generally used to discharge sewage and flow from top to bottom, so polyethylene drainage pipes generally do not need to consider the pressure level.
30
2022
/
06
Matters needing attention in PE drainage pipe construction
1. Before installing the pipe: Carefully check whether there is any damage in the process of loading, unloading, transportation and stacking. If any defective pipes such as damaged cracks and deformation are found, they should be removed in time. 2. Inspection well and pipeline connection: The flexible joint sealed with flexible packing should be adopted, and the specific structure shall be carried out according to the design requirements. 3. When excavating trenches and making foundations, attention should be paid to: (1) The net width of the groove bottom should be used according to the outer diameter of the pipe plus 0.6m; (2) Drainage measures should be taken during trench excavation to prevent the bottom of the trench from being soaked in water;
30
2022
/
06
PE pipe is beautiful and hygienic, easy to install, safe and reliable, and the price is favorable. It is suitable for laying in urban water supply pipes, green irrigation pipes, and some places that need to withstand high pressure, and has become a mainstream product in the water supply industry. The common nominal diameters are printed on the PE pipes, and the letters represent 'dn', such as dn110, dn315, indicating that the nominal diameters of the pipes are 110mm and 315mm; some pipes will also be printed with de90, de160, which means that the pipe outer diameter. PE pipe: beautiful and hygienic, easy to install, safe and reliable The flexibility of the PE pipe makes it easy to bend, and the engineering can bypass obstacles by changing the direction of the pipe. In many occasions, the flexibility of the pipe can reduce the amount of pipe fittings and installation costs.
30
2022
/
06
PE pipes do not need anti-corrosion treatment and maintenance
E pipe does not need anti-corrosion treatment, maintenance-free, and has a lifespan equivalent to that of a building. It solves the problems of traditional pipe products, such as corrosion, aging, water leakage, and unsanitary in a short time. PE pipe effectively eliminates product maintenance and renewal costs. PE pipes do not need anti-corrosion treatment and maintenance The PE pipe manufacturer points out that the expansion volume needs to be larger than the storage volume required for the instantaneous flow of the transverse branch pipe. The discharge status of the outlet pipe is mainly to avoid burying, which leads to the decrease of the flow of the entire drainage system; this echoes the rational planning of the drainage project of the whole project. PE pipelines have a variety of construction techniques. In addition to traditional excavation methods, various new trenchless techniques such as pipe jacking, directional drilling, lining pipes, and cracking pipes can be used for construction. PE has excellent resistance to most household and industrial chemicals. Certain types of chemicals are chemically aggressive, such as corrosive oxidants (concentrated nitric acid), aromatic hydrocarbons (xylene), and halogenated hydrocarbons (carbon tetrachloride).
30
2022
/
06
What should I do if the wall thickness of the pe pipe manufacturer is uneven?
1. Check whether the temperature of the downstairs mouth is stable, the hand feeling is not hot, and whether the water in and out is enough (for a pipe that is uneven before and after) 2. Adjust the wall thickness on the mold, and adjust the size of the gap around the mold. The small diameter is always around, and the large diameter is always up and down. 3. Adjust the angle of the vacuum forming machine and the nozzle in the spray box to make the pipe cool evenly 4. Adjust the water outlet of the sizing sleeve (ditch tip water hole) to make the water outlet evenly 5. The caliber can adjust the wall thickness drawing ratio to reduce the influence of the melting hammer on the tube wall thickness 6. The pe pipe manufacturer disassembles the mold, checks whether the screws inside the mold are loose, and re-tighten them
30
2022
/
06